Tech 🎧Audio 🔴Broadcast 🎙In the studio 🎵Music 🎥Video

🎥Streaming live music sessions for student radio…


Earlier this year, before lockdown; me and Peter Riggs launched ‘Brayford Afterdark’ with the goal to help promote and grow smaller artists through our network – a student ran music discovery service if you like, much alike Audiotree over in Chicago.

UPDATE: since launching ‘Brayford Afterdark’ I’ve discovered, University Radio Nottingham also have a ‘URN Afterdark’ which I think they class all their late-night genre-specific programming by, sorry about that, I didn’t know! 

Afterdark Banner Image - If you can't see this then something's gone wrong

🎧🎬This kind of work is a dream come true for me, and is always what I’ve enjoyed doing the most – so, behold – this is how we did it.

First off, to be truthful, it wasn’t as smooth as it could have been technically – but early days as we continue to learn and improve our set-up – season two is going to rock! 🤘🏻

As media students, we all used whatever equipment we could get our hands on to make it work with a very heavy ‘build overbuy’ kind of mentality, especially because at the end of the day, we weren’t doing this for profit and a lot of money is not what we have. Considering, I think it worked pretty well!

🎧The audio side of things – Capturing the live sound and broadcasting it to two different platforms simultaneously.

We used Recording Studio 1 at the University of Lincoln for all our live sessions in season one. We used a combination of different mics to capture the sound and mixed it all live using the built-in EQ on the Audient Console (ASP 8024) and two outboard compressor units. (thanks to Freyja Smith’s, Harry Mason’s and Annabel Wall’s amazing live audio skills.)

We mainly used a mix of SM57’s, SM58’s, Audix Drum Mics and AKG 414’s for our microphones in the live room.

Studio Console

In the studio

NB: Since the patch bay on the console isn’t labelled if any other UoL Audio student happens to come across this – here is the patching for the external compressors! 😉


After the mix goes through the Audient Console (I could write a whole separate post just on that); I took the master tape (L/R) signal out of the patch bay and ran it into a Focusrite Scarlett 2i2 (Thanks Annabel for lending us her interface) – this was then connected via USB into the master iMac that we had running the studio, and routed into a truly awesome bit of software developed by Zach Poff that takes an audio signal and transfers it in real-time over a local network (a little like a Dante/Rednet/VBAN network) to different computers on the network, in this case – a Mac we had previously set-up in the Brayford Studio.

The software’s simply just called ‘Network Audio Transmitter’ and is available free for MacOS here. 👍🏻

If you’re on Windows (and maybe even Linux but don’t quote me on that), the exact same thing can be done using another free piece of software called ‘VB Audio Voicemeeter’ using the VBAN protocol. (it’s really handy and works really well! I used it for multi-room audio at home once when I wanted to play vinyl in the living room/kitchen.)

Before I go any further I should also note that every single bit of software we used all ran directly off an external HDD so that we didn’t break any rules installing software onto University-owned computers.

The audio stream for the Twitch video stream, however, did not get its audio from this method – that was a case of a direct digital master mix from the Orion 32 track USB interface that lives in the studio, fed directly into OBS. Due to limited CPU resources, we never captured the raw audio live in a DAW like Pro Tools or external audio recorder, however, this is hopefully changing in season two.

In the earlier streams, before I learnt the correct patch bay routing, I simply took two outs from the headphone distribution amp to provide a very mono signal for people listening on the radio and not the video stream, not ideal – but worked okay, especially considering most of our viewers were watching on the Twitch video platform,.and not the audio-only radio platform.

I also used the two inputs on the front of the Focusrite interface to hook up my laptop to run station branded jingles, sweepers etc. I had full control over the playout system (Myriad 4) in the Brayford studio via remote desktop (TeamViewer), but for jingle/sweeper/ident playout I actually used a free web-app called ‘My Cartwall’ by Playit Software which runs in a web browser and is super easy to configure and use.


The Set & Process!

The Set

I haven’t got a whole lot to say about the set – other than it’s incredible and made possible by our awesome team – Harry Mason, Freyja Smith, Annabel Wall, Kyle Odefey and Peter Riggs. I’d also like to say a big thank you to Zara Healy for the banners for the station too! (if anybody in LSFM noticed the plants from the common area’s went missing whilst we were doing a set, this is what happened to them, not sorry. 😅)

Our process usually involved setting the studio up from around 5/6, we’d often meet the artists that were playing in the Swan over the road and begin soundcheck and stage set-up at 7:30/8 (depending on the size of the group), to go live round about 9pm. Adele Wilkinson’s New Music Show would air in the hour before us on the station, and the stream would switch over at 9 to recording studio 1, thanks to Adele for fading up the network stream in the Brayford studio. Adele’s radio show is still going strong, and you can tune in Monday’s 8-10PM now. 🙂

For all the streams we did; we focused mainly on the live side of things; so sadly we didn’t get any permanent recordings from the 4 groups we had (and the ones that did record, the capture card couldn’t keep up with and ended up being really laggy and pretty unusable) – however, for future sessions, I want to ensure every camera is rolling so that we can produce on-demand videos for our platforms too.

🎥The visual side of things – Capturing the action in 1080p and streaming to

We streamed in 1080p, 29.97fps to our channel on using OBS (Open Broadcaster Software.) We also live recorded the encoded stream into what personally I’m calling the worlds most annoying format (.flv) as it needs decoding to be editable! Sadly, something down the line (probably the Mac) struggled a little and the recordings sometimes didn’t encode properly causing corruptions in the recorded media. (rethinking this system for season 2!)

Camera feeds were run into an old USB capture card I had laying around – annoyingly, due how old this capture card was, it wasn’t compatible with MacOS natively, so we had to open the capture cards management live-view window and screen cap this into OBS (what a pain!) This is the first thing that’s getting an upgrade!

We also used a HDMI Matrix switcher that I had on my TV in my living room to change cameras, these long-winded changes (the HDMI signal cuts for a few secs when switched this way) were covered with OBS transitions that can be made in Adobe AfterEffects.

Ideally, we need something like a Blackmagic Production Switcher, but with their cheapest mini switcher being priced at £285, it’s not very student budget-friendly – So it’s looking like we’ll keep using a multitude of different capture cards (an upcoming project of mine could potentially include retro-fitting a PCI Capture-card into a mini Dell Optiplex to rack-mount) into OBS for now.

Camera-wise, we used Peter’s Sony Nex fs100 and Kyle’s Canon DSLR (I think it was a 70D but I can’t remember). For these kind of productions, I think semi-freehand with maybe a steady cam rig is best to move around and capture the live-action up close. Huge thanks to Kyle Odefey for being our resident camera operator, we’re going to miss him in season 2 if he can’t get back from America! 📸

Similar to a multi-view output from Blackmagic’s gear (I used to use a Blackmagic 4k Production Switcher regularly on some older events) OBS can provide a nice fullscreen multi-view, which we projected onto a TV in the studio control room.


Future plans & Afterdark S2 (Hopefully🤞🏻)

The Brayford Afterdark project is great fun, helps grow artists through our radio station, helps bring new listeners to our radio station, helps engage our audience, and even provides some work experience-esk opportunities to fellow students working on the project. I’ve started working on plans for a portable rack mount carry-on like unit to provide better performance for streams, additional audio processing and hopefully better live camera switching – so stay tuned for more techie ramblings soon! 😃

Providing COVID doesn’t spike again, hopefully, we’ll return in the not too distant future. Outside broadcasts (as in, actually outside, probably in a field or something over 4G are looking pretty promising, so we’ll see.) 🎬

AfterDark - Who's Misty Session

Leave a Reply